3000 x 600 (Large)

Specifications

Dimensions and details

• Panel (mm): H3000 x W600 x D21
  
• Slat (mm): W27 x D12
• Felt Depth (mm): 9
• Panel Coverage (m²): 1.44
• Slats per panel: 15
• Panel Weight (kg): 14
• Composition: Real Wood, Black MDF core, Recycled Felt

Technical Sheet - Indoor Panels

Installation Guide

Installing Delaco Panels is simple, thanks to their lightweight and semi rigid structure. Panels can be bonded directly to the wall using a strong grab adhesive such as Liquid Nails or fixed with screws through the felt backing. Please refer to our full Installation Guide for more details.  

What You Will Need

• Tape measure

• Fine toothed hand saw or circular saw

• Sharp utility knife

• Liquid Nails or similar adhesive

• Screws 30 to 32 mm

• Screwdriver or drill

• Masking tape and pencil

• Stud finder

• Plasterboard anchors if required

• Safety glasses and mask

• Staple gun and staples if trimming felt

Installation With Adhesive

Panels can be fixed directly to plasterboard, timber or most smooth surfaces.

1. Apply a strong grab adhesive to the felt backing in three wavy lines along the length of the panel.

2. One tube of adhesive will usually cover three panels.

3. Position the panel on the wall and press firmly.

4. Repeat for each panel, ensuring the slats align correctly.

Installation With Screws

Use screws for added hold or when fixing into studs or battens.

1. Use 15 screws per panel.

2. If fixing to studs, use wood screws into the stud through the felt.

3. If fixing to plasterboard, pre drill and use plasterboard screws or plugs.

4. Apply adhesive first, press the panel into place, then secure with screws.

   
   

Cutting the Panels

Horizontal cuts

• Add masking tape to the front of the panel.

• Mark a straight line using a square tool.

• Cut with a fine toothed hand saw or circular saw.

Vertical cuts

• Slice the felt backing carefully using a sharp utility knife.

  
  

Important Step for Light Coloured Felts

This applies only to panels with white or beige felt.

1. Apply tape to the middle of each slat before cutting.

2. Make your cut, then remove the tape for a clean finish.

Panels with darker felts do not require this preparation.

Installing Into Brick or Concrete

• Pre drill holes through the panel.

• Insert wall plugs into the drilled holes.

• Screw through the felt into the plugs.

Alternatively, fix timber battens to the wall and screw the panels into the battens.

Maximum Acoustic Performance

For Class A acoustic performance:

• Use 45 mm deep battens

• Place mineral wool between battens

• Screw panels into the battens

This method increases sound absorption significantly.

Installation Styles

​1. Stacking the Panels

​Panels can be stacked vertically for a tall and seamless wall.

​2. Spacing Gap

​Leave a 1.5 mm to 3 mm gap between panels for a modern feature.

​3. Horizontal Slat Break

​Add a timber slat horizontally to break up the wall and create a custom design.

Maintenance and Cleaning

• Light dusting will prevent build up.

• Use a slightly damp microfibre cloth if required.

• Do not use chemicals.

• Cutting outdoors is recommended to avoid black MDF dust indoors.

  
  

Need Help

If you have questions, please contact our team at admin@delacopanels.com.au.

Shop Now

Shipping & Delivery

Standard delivery: 3–7 business days Australia-wide.

Warehouse pick-up: Available from our Brisbane location (please allow 48 hours after payment for order preparation).

Delivery Rates

Note: Remote area shipping rates apply to deliveries outside NSW, VIC, and QLD. These include Western Australia, South Australia, Tasmania, Northern Territory, and the ACT. For orders of more than 16 panels, please contact us directly for a custom shipping quote.